[Guides](https://firelent.com/guides)

Launch · Updated October 9, 2026

# Put your website on your own domain

From yoursite.firelent.app to yoursite.com: which records to add, where to add them, and what to do when the status won't turn Live.

- Time

3 min

- Steps

6

- Level

Beginner

Every Firelent website goes live on its own address, like `fade-co.firelent.app`. That works from day one — but your own domain is easier to remember, easier to trust, and it stays yours whatever you build it with.

Connecting one takes about ten minutes of your time, plus however long your domain provider needs to pass the change on. Here's the whole way, including the part where most people get stuck.

Before you start

- **A published website.** A domain points to your live site, so the site has to be live first.
- **A domain you own,** from a provider such as IONOS, Strato, GoDaddy or Namecheap.
- **Your login for that provider.** You'll change two or three settings there.
- **The Pro plan.** Custom domains are part of Pro.

## Publish your site first

If your site isn't live yet, click **Publish** in the top right of the editor and choose **Firelent Hosting**. A few seconds later it's online at its `firelent.app` address.

The Where to publish? menu with Firelent Hosting and Vercel

Where to publish? — choose Firelent Hosting.

Open it once and click around. Whatever you see there is exactly what your domain will show — so this is the moment to fix anything that bothers you.

## Decide which addresses you want

`myshop.com` and `www.myshop.com` look like one address, but to the internet they're two. Most people type the short one; some still add `www`, and older links and printed material often use it.

Connect both, and either one leads to your site. You'll add them one after the other in the next step.

## Connect the domain in Firelent

Open your project, switch to the **Project** tab and choose **Domain**. Under **Connect a domain**, type `myshop.com` and click **Connect**. Then do the same for `www.myshop.com`.

For each one, Firelent now shows the records to add under **Add these records at your domain provider:** — every record with a **Name** and a **Value** you can copy. Keep this page open; you'll copy from it in a moment.

## Add the records at your provider

Log in to your domain provider and open the DNS settings for your domain. Depending on the provider, they're called something like _DNS_, _DNS settings_ or _Manage DNS_.

Which records you add depends on the address:

| Address          | Add                  | Value                             |
| ---------------- | -------------------- | --------------------------------- |
| `myshop.com`     | Two **A** records    | `188.114.96.3` and `188.114.97.3` |
| `www.myshop.com` | One **CNAME** record | `custom.firelent.app`             |

If Firelent also shows a **TXT** record, add it exactly as shown.

For the name of each record, copy what Firelent shows. Two small differences between providers trip people up: many write `@` for the main domain itself — if yours does, use `@` — and many add your domain to the name automatically, in which case `www` on its own is enough.

Clear out what's in the way

New domains often come with records already set up, usually pointing at a “coming soon” page from your provider. If your main domain already has an **A** or **AAAA** record, or `www` already has a **CNAME**, delete it or replace it with the values above. Left in place, it sends some of your visitors to the old page.

## Wait for Live

Back in Firelent, the Domain section checks your domain every few seconds while it's open. It says **Waiting for DNS records…** until your records are found. Then Firelent sets up the certificate, and the status turns **Live**.

Most changes arrive within minutes. Some providers take longer to pass them on — occasionally a few hours. Nothing is wrong while you wait; you can close the page and look again later.

If the status says **Verification failed**, compare each record at your provider with the ones Firelent shows. A typo in a value, a missing record or an old record still in place are the usual reasons. Fix it, remove the domain in Firelent with the trash icon, and connect it again.

## Check it, then share it

Open both addresses — `myshop.com` and `www.myshop.com` — on your computer and on your phone. Look for the padlock in the address bar: Firelent issues the SSL certificate for every domain you connect, so there's nothing to buy or install.

Your `firelent.app` address keeps working alongside your domain, so links you've already shared won't break. Still, now's the time to update the places people find you: your Google business profile, your social media profiles, your email signature and anything you print next.

Where you are now

Your site is live on your own domain, served securely over HTTPS.

In the docs[Domain ](https://firelent.com/docs/projects/settings/domain)[Publishing](https://firelent.com/docs/projects/settings/publishing)

Next guide

[Websites · 6 steps](https://firelent.com/guides/write-your-first-prompt)

[Write a first prompt that gets you the site you want](https://firelent.com/guides/write-your-first-prompt)

---

Source: https://firelent.com/guides/connect-your-domain
More pages: https://firelent.com/llms.txt
